vvdishop

How to install Dolphin XP005 Software Driver?

vvdishop | 09 October, 2019 03:56

How-to: update Xhorse Dolphin XP005 key cutting machine software/firmware and install driver using Upgrade Kit.
Preparation:
Download Xhorse Upgrade Kit
Download Dolphin XP005 Windows x32 x64 Drivers
Download Upgrade Kit and install setup
Update the Upgrade kit to the latest version
update-dolphin-xp005-1
update-dolphin-xp005-2


update-dolphin-xp005-3
Connect Dolphin key machine with computer via USB cable
update-dolphin-xp005-4
Turn on the Dolphin XP005 machine and connect it with the computer, it will show the BIOS on the screen of Dolphin as below,
update-dolphin-xp005-5
Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver
update-dolphin-xp005-6
update-dolphin-xp005-7
Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system
update-dolphin-xp005-8


update-dolphin-xp005-9
You need to download and install Windows driver for Xhorse Dolphin
update-dolphin-xp005-10


update-dolphin-xp005-11
update-dolphin-xp005-12


update-dolphin-xp005-13


update-dolphin-xp005-14
After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Upgrade’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver
update-dolphin-xp005-15
Press “Upgrade” and wait till the procedure completed
update-dolphin-xp005-16
Update succeed.
update-dolphin-xp005-17 
www.vvdishop.com

Comments

Add comment

 This is the ReCaptcha Plugin for Lifetype

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6